Ensemble Designs BrightEye 75 HD/SD Analog to Digital Video Converter and Analog Audio Embedder - Manual (Page 9)

TM
BrightEye 75
BrightEye 75 - Page 9
Vid Gain
This control adjusts the gain of the analog video signals of the converter. The
right arrow increases the gain; the left arrow decreases it. The
Vid Gain
indicator illuminates green when the gain is set to its nominal or unity setting.
Setting
Vid Gain to unity ensures correct analog output levels from an analog
input source that is at proper level itself. The Vid Gain indicator illuminates red
if the control is adjusted higher or lower than its nominal setting. To reset gain to
its nominal setting (green) press both arrows simultaneously.
Audio
Output level and the status of audio channels 1 and 2 are indicated by the state
the
VU and Gain indicators:
VU
This indicator illuminates red when the audio level exceeds the headroom
level set with the
Peak Indicator control in BrightEye PC or Mac.
Additionally, the VU indicator illuminates yellow when the output is above
0 VU, and illuminates green when the output is above -20 VU. When the
output level is below -20 VU, the indicator does not illuminate.
Gain
This indicator Illuminates green when output gain is set to its nominal or
unity value. It illuminates red when gain is set to other than unity.