Ensemble Designs BrightEye 75 HD/SD Analog to Digital Video Converter and Analog Audio Embedder User Manual
Page 10
BrightEye 75 HD/SD Analog to Digital Converter and Analog Audio Embedder
BrightEye 75 - Page 10
USING THE BRIGHTEYE CONTROL APPLICATION
The BrightEye PC and BrightEye Mac applications included on CD-ROM are
designed to allow you to configure and control the BrightEye 75 from a personal
computer. Installation and instructions for using this software application are
given in the PDF manual on disk.
If the BrightEye 75 is connected to a computer running this software, the
following menus are available for controlling and monitoring the unit.
Input Menu
• Input Pres – indicates the status of the video input (None, SD 525, SD 625,
HD 525, or HD 625.
• Input Sel – select the type of input signal to the unit from the pulldown as
Composite, Y/C, RGB, SMPTE, Beta, or Bars.
• Analog Setup – set to On if setup is present on the analog input, or Off if
no setup is present.
• Ref Status – indicates the status of a reference video presence
(
No Reference or Ref Present).