Ensemble Designs BrightEye 75 HD/SD Analog to Digital Video Converter and Analog Audio Embedder - Manual (Page 4)

BrightEye 75 HD/SD Analog to Digital Converter and Analog Audio Embedder
BrightEye 75 - Page 4
APPLICATIONS
The BrightEye 75 is well-suited to applications using HD Cameras or other
devices with analog I/O. The built-in TBC/Frame Synchronizer allows you to feed
asynchronous or noisy signals to the BrightEye 75. These are then digitized and
time-base corrected by noise-tolerant tracking circuitry.
The example below shows a three-camera, live studio setup. Full bandwidth
analog video from an HD camera is fed to a BrightEye 75 and converted to HD SDI
digital video. The signal is time base corrected and frame synchronized to the
reference input. The signal is then sent to a Production Switcher and out to live
broadcast.
The analog audio from the cameras enters the BrightEye 75 two-channel
A to D converter. Adjustments for audio mixing, audio levels, and channel
shuffling can then be applied to the audio before it is embedded into the SDI
output signal and fed to air.
Production
Switcher
BrightEye 75
BrightEye 75
BrightEye 75
HD SDI
HD SDI
HD SDI
Analog HD Video
HD SDI
To Air
Ref In
Ref In
Ref In
Ref In
Y
Pr
Pb
Y
Pr
Pb
Y
Pr
Pb
1
2
3
BrightEye 75 Signal Ingest Application for HD Signals