Ensemble Designs BrightEye 75 HD/SD Analog to Digital Video Converter and Analog Audio Embedder - Manual (Page 15)

TM
BrightEye 75
BrightEye 75 - Page 15
Trim Menu
The
Trim menu provides an advanced level of adjustment to match your BE75 to
a particular source if needed. Use the Trim menu to fine tune the color
parameters of the output signal up or down, positive or negative. The values
shown below are typical, though each BE75 may vary.
• When input is Cpst, adjust Composite Trim and Saturation Trim
from -100 to 100.
• When input is Y/C, adjust Composite Trim and Saturation Trim
from -100 to 100.
• When input is RGB, adjust CAV Y/C Trim, CAV Cr/R Trim and
CAV Cb/B Trim from -100 to 100.
• When input is SMPTE, adjust CAV Y/C Trim, CAV Cr/R Trim and
CAV Cb/B Trim from -100 to 100.
• When input is BETA, adjust CAV Y/C Trim, CAV Cr/R Trim and
CAV Cb/B Trim from -100 to 100.