Ensemble Designs 9455 3G Clean and Quiet Protection Switch - Manual (Page 45)

www.ensembledesigns.com 7435 and 9455 - page 45
Model 7435 and 9455 Clean and Quiet Protection Switches
Step by Step Overview for Updating Software in your 9455 or 7435:
Step 1. Connecting the Cable
Attach the 23700048 Interface Adapter Cable to the 15 pin D connector associated with the clean
switch module on the back of the Avenue frame. Connect an Ethernet cable from the Ethernet port
end of the “Y” cable to your network. The Ethernet port will auto-sense cable direction, so a cross-over
cable is not needed.
Step 2. Setting the IP Address
Use the IP Address menu in Avenue PC or on your Touch Screen to assign a unique IP address to the
9455/7435 module.
Step 3. Setting the Subnet Mask
Use the Subnet menu in Avenue PC or on your Touch Screen to set the subnet mask for the
9455/7435 module.
Step 4. Download Current Software
Download the current software for 9455 or 7435 to your PC or Mac from the following website:
http://www.ensembledesigns.com/support/avenue-support/avenue-software
Step 5. Navigate to your 9455/7435 Module through a Web Browser
On a computer that is networked to the Avenue frame, type the IP address of the 9455/7435 into the
address bar of your web browser. The Setting: General Information window will come up.
Step 6. Update the Module Software
In the Setting: General Information window, click the Choose File button. Navigate to the software that
you downloaded to your computer in Step 4. Click the Start Update button. The Updating Firmware
window will come up. The updating process can take several minutes.