Ensemble Designs 9455 3G Clean and Quiet Protection Switch - Manual (Page 44)

www.ensembledesigns.com 7435 and 9455 - page 44
Model 7435 and 9455 Clean and Quiet Protection Switches
Software Updates
Software updates for the 9455 and 7435 modules are done via Ethernet. Software updates are free for
life and can be downloaded onto your PC or Mac from the following website:
http://www.ensembledesigns.com/support/avenue-support/avenue-software
Each 9455 and 7435 comes with a “Y” adaptor cable that provides Ethernet and GPI/GPO control. The
23700048 Interface Adapter Cable cable, shown below, connects to the 15 pin D connector associated
with the clean switch module on the back of the Avenue frame. The Ethernet is used for software
upgrades and the 9 pin D connector is used for GPI control.
Software updates are done with a web browser through the Ethernet connection, not thorough
Avenue PC. A synopsis of the steps for updating software is on the following page. Detailed instruction
instructions for updating software in your 9455 or 7435 module follow, including setting the IP address
and subnet mask of the 9455/7435 are on the subsequent pages.
The “Y” adaptor cable pictured below is the
Ensemble Designs p/n 23700048 Interface Adapter Cable.
It provides an Ethernet connection for software upgrades
and a 9-pin GPI connector for control.
Connect the male 15 pin D
connector to the female 15
pin D connector on the back
of the frame that corresponds
to the clean switch module
9 pin female D connector
for control.
Ethernet port
for software
upgrades