Epson S01-00 - Manual (Page 13)

1-4 Installing the Software
L Proof Sign-off:
E. Omori
_______
M. Fujimori _______
K. Pipa _______
EPSON Photo!3
Rev. C3
A5 size CHAP1.FM
9/8/99 Pass 0
3. Open the connector cover on the side of the
camera. Insert the other end of the serial cable to
the interface connector. Make sure the shape of
the cable connector fits the interface connector.
c Caution:
Be sure to position the cable correctly before
pushing it into the connector. Otherwise, the
cable's pins may be damaged.
4. Turn the camera’s dial switch to and turn on
your computer.
c Caution:
Keep your camera and computer away from
potential sources of electromagnetic interference,
such as loudspeakers or base units of cordless
telephones.
Connecting to a Macintosh
You can connect the camera to a Macintosh with a
Macintosh serial cable. Follow the steps below.
Note:
To connect to a Macintosh with a USB cable, see “Using
the USB cable” on page 1-2.
1. Make sure the camera and your computer are
turned off.
2. Plug the serial cable connector into the modem or
the printer port on your computer.
connector cover
Macintosh serial cable