Epson S01-00 - Manual (Page 12)

Installing the Software 1-3
EPSON Photo!3
Rev. C3
A5 size CHAP1.FM
9/8/99 Pass 0
R Proof Sign-off:
E. Omori
_______
M. Fujimori _______
K. Pipa _______
1
❏ You can use a USB hub to connect several peripherals
to your computer. If you are using more than one USB
hub, connect the PhotoPC 800 to the hub that is
connected to the computer. If the PhotoPC 800 does not
work properly when connected to the hub, connect it
directly to the computer’s USB port.
3. If necessary, turn the camera’s dial switch to
and turn on your computer.
c Caution:
Keep your camera and computer away from
potential sources of electromagnetic interference,
such as loudspeakers or base units of cordless
telephones.
Using a serial cable
Connecting to a PC
You can connect the camera to a PC with a Windows
serial cable. Follow the steps below.
1. Make sure the camera and your computer are
turned off.
2. Plug the cable connector into the serial port on
your computer. Then tighten the screws.
Note:
If you have more than one port available, use COM1
or a similarly labelled port.
Windows
serial cable
serial port on computer