Epson S01-00 - Manual (Page 11)

1-2 Installing the Software
L Proof Sign-off:
E. Omori
_______
M. Fujimori _______
K. Pipa _______
EPSON Photo!3
Rev. C3
A5 size CHAP1.FM
9/8/99 Pass 0
Using the USB cable
To connect the camera to your computer with USB
cable, use the USB cable included with the PhotoPC
800.
Follow these steps.
c Caution:
Be sure to use the USB cable that comes with your
PhotoPC 800 to avoid damaging the camera’s
interface connector.
1. Plug the cable connector into the USB port on your
computer or USB hub.
2. Open the connector cover on the side of the
camera. Insert the other end of the USB cable to
the interface connector. Make sure the shape of
the cable connector fits the interface connector.
c Caution:
Be sure to position the cable correctly before
pushing it into the connector. Otherwise, the
cable's pins may be damaged.
Note:
❏
You can connect or disconnect the USB cable from the
computer or camera while the computer and camera are
turned on. If a dialog box appears, follow the steps in
“Installing EPSON Photo!3 for USB users” on page
1-6 to install the software.
USB port on computer
USB cable
connector cover