ARAG Digiwolf Tank filling system - Manual (Page 5)

5
3 inStallatiOn
The tank filling system must be connected by means of suitable fittings (With female fork coupling)
to a pump, which will supply the liquid to be poured into the tank.
Install the tank filling system at least 20 cm from the elements that could cause turbulence inside
the tubes (valves, bends, constrictions, etc.).
WARNING:
- Rest the tank filling system on a horizontal surface
- The system to which it is connected must have a filtering element with a filter of at
least 50 mesh, together with a safety valve to limit use pressure at the specified max.
value (12 bar).
CAUTION:
ARAG is not liable for damage to the system, persons, animals or things caused by
the use of material other than specified.
Failure to observe the above instructions automatically voids the warranty.
INSTALLATION