Alinco DJ-X7 User Manual

Page 36

Cable-clone

and

Connection

7.3 Operation for Transferring Data (on the Master)

1. Hold the

key for 1 second to turn the power ON

while holding the [MONI] key.

The following is displayed on the LCD, and the Master enters
the Clone mode.

2. Press the dial to transfer data of the Master's. Make

sure that the following is displayed on the LCD.

3. Make sure of the following display.

4. Turn the power OFF on the Master to release the

Clone mode.

If it should fail to transfer data, "

" is displayed on the

LCD. If you see this, redo from step 1.

PWR