beautypg.com

Alinco DJ-X7 User Manual

Page 24

background image

24

5

Advanced

Operations

• The all banks scan is valid only for numeric banks,

and other banks such as priority are disregarded.

• The banks can be expanded up to 50 with free

downloadable software we provide at our website.

1. Press the

key to switch to the Memory mode.

2. Hold the

key.

The currently selected scanning method is displayed.

3. Select a method by rotating the dial with the

key

pressed down.

Each method is displayed as follows on the LCD.
mEmorY .......Bank scan
Linq..............Linked banks scan
ALL ..............All banks scan
When you select the bank scan, the bank which is currently
selected in the Memory mode becomes a target bank for
scanning.

4. Release the

key.

This starts the memory scan. The decimal point (.) on the LCD
blinks during the operation.
When the DJ-X7 detects a signal, the scanning operation will
be suspended.

The following operations are applicable to all the
Scanning functions (VFO, programmed, preset, and
memory).
• The scanning starts in the direction of the last dial

operation (up and down). However, the programmed
scan searches for signals towards the other side you
selected. (From "A" to "b" or from "b" to "A")

• The scanning direction can be changed by rotating

the dial during the operation.

• Press any key other than the [MONI] key to stop

scanning.

• The scanning can be suspended to open squelch

temporarily by using the Monitor function (see on
P.15). Releasing the function resumes the scanning.

• You can choose the scan-resume condition from two

options. For more information, refer to "(6)Scan Type
Switching setting" on P.31.

5.2 Memory Skip Function

This function is for skipping the specified memory channel
while executing the memory scan function.
Follow the instructions below to set the memory channel you
wish to skip during the scanning operation.

1. Press the

key to switch to the Memory mode.

2. Select the memory channel you wish to skip.

3. Press the [F] key.

The

icon appears on the LCD.

MW

PRI

V/P/M

Memo

TONE

SCAN

TONE

SCAN

TONE

SCAN

MW

PRI

V/P/M

Memo