Alinco DJ-X7 - Manual (Page 33)

33
6
Set
M
ode
C
onfigurations
2. Rotate the dial to switch ON/OFF of the function.
When you set it to ON, the icon appears on the LCD.
When the DJ-X7 receives a signal, a bell sounds with the
icon blinked to let you know.
(12)Monitor/Mute function setting
With this setting, you can decide the role of the [MONI] key; to
be used for the Monitor function or to be used for the Mute
function.
moni.............The [MONI] key is used for the Monitor function.
mUtE............The [MONI] key is used for the Mute function.
1. Select the set menu No.12 by pressing the dial.
The following is displayed on the LCD.
2. Rotate the dial to change the display as shown below
and select the key role.
(13)Monitor-key Operation setting
With this setting, you can decide the operation of the [MONI]
key when the Monitor or the Mute function is used.
PUSH ...........The Monitor or the Mute function is valid while
holding the [MONI] key down.
HoLd............The Monitor or the Mute function switches to
valid/invalid every time the [MONI] key is pressed.
1. Select the set menu No.13 by pressing the dial.
The following is displayed on the LCD.
2. Rotate the dial to change the display as shown below
and select the operation mode.
「PUSH」 「HoLd」
「moni」 「mUtE」