Manufacturer information, Safety considerations – AEC Continuous Vacuum/Pressure Conveying Systems User Manual
Page 6

Single- and Dual-Blower Continuous Vacuum/Pressure Systems
Page 5
Safety Considerations
AEC single- and dual-blower continuous vacuum/pressure systems and system
components are designed to provide safe and reliable operation when installed
and operated within design specifications, following national and local safety
codes.
To avoid possible personnel injury or equipment damage when installing,
operating, or maintaining this equipment, use good judgment and follow these
safe practices:
;
Follow all SAFETY CODES.
;
Wear SAFETY GLASSES and WORK GLOVES.
;
Read and understand all product information before operating this
equipment.
;
Disconnect and/or lock out power before servicing or maintaining this
equipment.
;
Use care when LOADING, UNLOADING, RIGGING, or MOVING
this equipment.
;
Operate this equipment within design specifications.
;
OPEN, TAG, and LOCK ALL DISCONNECTS before working on
equipment. You should remove the fuses and carry them with you.
;
Make sure the vacuum/pressure system and components are properly
GROUNDED before you switch on power.
;
Do not jump or bypass any electrical safety control.
;
Do not restore power until you remove all tools, test equipment, etc., and
the vacuum/ pressure system and related equipment are fully
reassembled.
;
Only PROPERLY TRAINED personnel familiar with the information
in this manual should work on this equipment.