beautypg.com

AEC Continuous Vacuum/Pressure Conveying Systems User Manual

Page 55

background image

Page 54

Single- and Dual-Blower Continuous Vacuum/Pressure Systems

• Remove the two self-tapping screws at the left of the unit holding the muffler

bracket to the base. Take off the muffler with adapters.

• Place a new muffler, with adapters, in position. Tighten the setscrews that

secure it to the lower valve.

• Secure the bracket to the base with the two self-tapping screws.
• Couple the muffler-to-line adapter to the blowthrough adapter.
• Reconnect any copper air tube to the muffler.

-Notes-