Step ten: set the ir configuration, Step ten: set the ir configuration -17 – Extron Electronics IPL T SF Series User Manual
Page 37
IPL T SF Series Interfaces • Software Setup
3-17
Step ten: set the IR configuration
The IR Configuration tab is used to configure the IR ports that
are present on an IPL T SFI244 device only.
To configure an IPL T SFI244 IR port
1
.
Select an IR port in the IP Link Tree window.
2
.
Select a device type, manufacturer, and version in the IR
Driver Selection area.
3
.
Select a device driver.
4
.
Click the Add Driver button.
5
.
Select the desired driver in Added Driver(s) field.
6
.
Select the desired functions in the IR Port X Group/IR
Driver Function(s) field.
7
.
Click the green right arrow button to move the selected
functions to the GlobalViewer Web Group(s) window (8).
These are the functions that will be displayed and usable in
the GlobalViewer interface.
8
.
If desired, rename the Group Folder with a unique name.