Extron Electronics IPL T SF Series - Manual (Page 34)

IPL T SF Series Interfaces • Software Setup
Software Setup, cont’d
3-14
If the Flex I/O mode is Digital Output and the
mode is Open/Close - 2 Push Button
4 . Enter a unique description.
5 . Select Open/Close - 2 Push Button.
6 . Enter a unique open label.
7 . Enter a unique close label.
8 . Click the Pullup checkbox if desired.
If the Flex I/O mode is Digital Output and the
mode is Toggle - 1 Push Button
4 . Enter a unique description.
5 . Select Toggle - 1 Push Button.
6 . Enter a unique toggle label.
7 . Click the Pullup checkbox if desired.