Wavecom W-RCI (Remote Control) V8.7.0 - Manual (Page 53)

XML SDK V8.7.0 Remote Control Interface Parameter names and values

45
offset
Offset (former “translation”) frequency.
Values
An integer value between 0 and 21,000,000.
bandwidth
Bandwidth of the signal.
Values
An integer value between 50 and 24,000.
fine-speed
Adjusts the fine speed for a fax or SSTV picture.
Values
An integer value.
ioc-module
Sets fax Index Of Cooperation.
Values
“288”, “352” or “576”.
als
Automatic level setting control.
Values
“analog”, “digital”, “finish” or “off”.
filter
Low pass filter settings.
Values
A floating point value in the range of 1.0 to 100.0.
passband-center
Center frequency of band pass filter.
Values
An integer value between 100 and 3600 Hz.
passband-bandwidth
Bandwidth of the band pass filter.
Values
An integer value between 100 and 3600 Hz.
twinshift-1
Shift frequency between frequency 1 and frequency 2 of a 4FSK signal.
Values
An integer value between 10 and 800 Hz.
twinshift-2
Shift frequency between frequency 2 and frequency 3 of a 4FSK signal.
Values
An integer value between 10 and 800 Hz.
twinshift-3
Shift frequency between frequency 3 and frequency 4 of a 4FSK signal.