Wavecom W-RCI (Remote Control) V8.7.0 - Manual (Page 29)

XML SDK V8.7.0 Remote Control Interface Command messages

21
routput="Y"/>
routput="Y"/>
eroutput="Y"/>
Attribute List
IPaddress
IP address of a W-CLOUD station, it can be a DNS name.
port
The port number of a W-CLOUD station. The valid range is 52000 to 52009.
autoconnect
If a W-CLOUD station will be connected upon W-CODE restart. The valid value is “Y” or “N”.
encryption
If the I/Q signal from a W-CLOUD station to W-CODE is encrypted or not. The valid value is “Y” or “N”.
speakeroutput
If W-CODE outputs the incoming I/Q signal from a W-CLOUD station to its local speaker. This helps a user
to check if the signal sounds correct or not. The valid value is “Y” or “N”.
ConfigFile element
parts="3" sequence-nr="0" item="cc-table-hf"
path="C:\Users\Public\Documents\WAVECOM\CCC Code Tables\CCC Table HF 2011.09.09.xml">
...
Attribute List
parts
Number of parts the message has been split into. Because of the 32kB limit, files are split into 16kB-sized
parts.
sequence-nr
Number of the current part. The range can be 0 … (parts - 1).
item
Name of the item that has been requested.
path
Path of the configuration file.
Get messages
Get element