Wavecom W-RCI (Remote Control) V8.7.0 - Manual (Page 41)

XML SDK V8.7.0 Remote Control Interface Parameter names and values

33
ID 9 "File not found"
Severity warning:
ID 7
"the specified card does not exist"
Severity information:
ID 3
"card already set"
Parameter names and values
Parameter element
...
List of Parameters
Note A list of all valid and available parameters can be retrieved using the metadata commands.
To retrieve a complete list of possible codes use the following get command:
To retrieve all possible parameters for a specific code, including ranges and possible values, use the fol-
lowing get command:
additional-information="fec-a"/>
code
Code of the decoder. The RCI parameter code is equal to the decoder mode.
Values