Wavecom W-RCI (Remote Control) V8.7.0 - Manual (Page 39)

XML SDK V8.7.0 Remote Control Interface Information messages

31
name
Name of the custom alphabet. This attribute is required and is a string.
Content
This element has no content.
CustomInputList message
CustomInputList element
content
Content
The content is a sequence of zero or more CustomInput elements.
CustomInput element
input-name="CustInp" device="file" file-path="C:\Audio\test.WAV" channel-
config="left" play-continuous="off"/>
port-number="120000" format="ip-conf" sampling-rate="48000"/>
Attribute list
input-name
The name of the custom input.
device
The type of input. Valid values are “file”, “network” or “soundcard” (for W-PCI, W-PCIe, W74PC and
W61PC only).
file-path
The path to the specific WAV-file.
channel-config
Recording channel(s) to be used. Valid values are “mono”, “left”, ”right”, “leftplusright” or “iq”.
play-continuous
Indicates if files are played in repeat mode. Valid values are “yes” or “no”.
ip-address
IP-address of the TCP/IP connection. It is fixed to “0.0.0.0”, means connections from all IP addresses are
accepted.
port-number
TCP-port of the TCP/IP connection.
format
Data-format of the information transferred over the TCP/IP connection.
Valid values are “ip-conf”, “ip-pxgf” or “vita-49”.