Wavecom W-RCI (Remote Control) V8.7.0 - Manual (Page 17)

XML SDK V8.7.0 Remote Control Interface Data messages

9
BinaryFFT element
023F023FAAAA….023F023F
Attribute List
This element has no attributes.
Content
The content is the binary encoded FFT data. The encoding type (base2, base16, base64 or base64-mime)
is set by the Set Configuration Message.
Characters are converted into bits according to the selected encoding type.
Encoding type Bits per character Character set
base2 1 0, 1
base16 4 0-9, A-F
base64 6 0-9, A-Z, a-z ,+, /
base64-mime 6 0-9, A-Z, a-z, +, / (“=” padding character for byte alignment)
Each FFT value is represented by a signed 16 bit word, where 12 bits are used for the integer part and 4
bits are used for the real part of the value. The following example shows how to extract the FFT value
from a bit stream:
Received:
1101 0101 0011 1111
Mirrored: 1111 1100 1010 1011 (network order)
Integer-part: 1111 1100 1010 = -54 (two's complement)
Real-part:
1011 value = 11/16 = 0.6875
FFT value = -54 + 0.6875 = -53.3125 dB
Result messages
Result element
content
Attribute List
description
Description of the result. This attribute is required and is a string.
Content
The content is the result in a text format.