Wavecom W-RCI (Remote Control) V8.7.0 - Manual (Page 32)

24

Command messages XML SDK V8.7.0 Remote Control Interface
serial-nr
Serial number of the card. This attribute is implied and is an unsigned integer.
Note: The card element actually has more attributes than the three described here, but they are irrele-
vant in the connect message and are ignored if they are set in this case.
To connect to a card only one of the three above described attributes is needed. If more than one is set
with a valid value, the priority for which card is set is:
1. serial-nr (recommended)
2. number
3. name
Content
This element has no content.
Disconnect message
Disconnect element
It disconnects from the actually connected card.
Attribute List
This element has no attributes.
Content
This element has no content.
Activate messages
Content
Activate element
Attribute List
item
The item to activate. This attribute is required and its value is “GUI-Application”. The GUI application is
launched on the specified server and a connection is opened to the server and card to which the remote
client is connected.
Content
The content is the server element.
Server element