Watson-Marlow SPS - Manual (Page 46)

MasoSine SPS sinusoidal pumps User Manual 46
SPS 100 pumps
l Reverse the special tools and use the angled ends in the same way to apply
further leverage to the end of the seal housing, until it is accessible within the
pump chamber. Remove it.
The two versions of the SPS 100 pump
seal housing: left, where no static flush-
ing system is fitted; right, where a static
flushing system is fitted
Disassembling the seals
l Graphics making clear how to disassemble and assemble the seals appear in
section 25.2.