Watson-Marlow SPS - Manual (Page 45)

MasoSine SPS sinusoidal pumps User Manual 45
Removing the sealing system
l Use the special tools supplied with the pump to remove the seal housing.
l Position the pointed ends of the special tools to apply leverage to opposite
sides of the seal housing at once: first, to the castellations of the seal housing;
then to the end of the seal housing.
SPS 100 pumps
First
leverage
point
Second
leverage
point
Second
leverage
point
Direction of
movement
Note: If your SPS 100 pump is fitted with a static flushing system, this must be
removed before removing the sealing system. See 23 The static flushing device.