Watson-Marlow SP40 - Manual (Page 8)

SAFETY
5
2 SAFETY
2.1 Symbols
In this manual the following symbols are used:
2.2 Intended use
The hose pump is exclusively designed for pumping
suitable products. Every other or further use is not in
conformance with the intended use. (1)
The manufacturer cannot be held responsible for
damage or harm resulting from this. The hose pump is
designed in conformance with the valid standards and
directives.
Only use the pump in conformance with the intended
use described above. If you want to change the
application of your hose pump, contact your Bredel
representative first.
1.
The "Intended use" as laid down in EN 292-1 is
the use for which the technical product is
intended in accordance with the specifications
of the manufacturer, inclusive of his indications
in the sales brochure". In case of doubt it is the
WARNING
Procedures which, if not carried out with
the necessary care, may result in serious
damage to the hose pump or in serious
bodily harm.
CAUTION
Procedures which, if not carried out with
the necessary care, may result in serious
damage to the hose pump, the surrounding
area or the environment.
Remarks, suggestions and advice.