Watson-Marlow SP40 - Manual (Page 7)

GENERAL
4
1 GENERAL
1.1 How to use this manual
This manual is intended as a reference book by means
of which qualified users are able to install, commission
and maintain the hose pumps Bredel CIP 40 and Bredel
CIP 50.
1.2 Other supplied documentation
Documentation of components such as the gearbox, the
motor and the actuator is not included in this manual.
However, if additional documentation is supplied, you
must follow the instructions in this additional
documentation.
1.3 Service and support
For information with respect to specific adjustments,
installation, maintenance or repair jobs which fall
beyond the scope of this manual, contact your Bredel
representative. Make sure you have the following data
at hand:
•
serial number hose pump
•
article number pump hose
You will find these data on the identification plates or
stickers of the pumphead and the pump hose (refer to
section 4.1.1).
1.4 Used products and the environment
ENVIRONMENT
Enquire with your local government about
the possibilities for reuse or environment
friendly processing of packaging materials,
(contaminated) lubricant and oil.
Always observe the local rules and
regulations with respect to processing (non
reusable) parts of the hose pump.