Vuzix STAR 1200XLD AR System User Guide User Manual
Page 26
26
Tip:
Quickly switch between 2D and 3D video by double-pressing the “Go Back”
button
the Controller.
Note: The STAR 1200XLD is HDMI 1.4a compliant and should correctly display DRM protected 3D
content when available in side-by-side or top/bottom format.
The STAR 1200XLD’s Controller is designed for use with all HDMI audio video output sources,
including but not limited to Windows based personal computers, mobile phones and tablets.
Note
A STAR 1200XLD may work with other operating systems, such as the Mac OS or Linux, but
some components may not work with these operating systems. Though it is known that the
STAR 1200XLD display works with many of these alternate operating systems, these operating
systems are not officially supported for this product and Vuzix does not provide software or
technical support for them.
The STAR 1200XLD’s nose bridge and pads are adjustable. For the best viewing experience your
displays should be centered in front of your eyes. By sliding the nose bridge assembly’s stem in or
out of the display module you can adjust the resting height of the displays. By bending the wire
nose pad arms you can address the angle and spread of the pad to achieve optimum comfort.
To adjust the nose bridge:
§
Slide the nose bridge assembly in and out to adjust its reach to position the eyewear
displays directly in your line of sight.
Note: If you withdraw the nose bridge assembly too far enough, it will come completely out of the
display module. Don't worry if this happens as it can be easily slid back in and enables you to
replace the nose bridge assembly should it be broken.
§
Gently bend the wire arms of the nose pad to achieve a comfortable fit with the pad’s face
resting on the bridge of your nose – in the same manner that you would adjust the nose
pads on standard eyeglasses.
Tip:
Gentle persuasion with a pair of needle nose pliers works best to bend the wire nose pad arms.
This places the least amount of strain on the assembly and adjacent parts.