Ordering information, Optional equipment, Ordering information optional equipment – Verilink PRISM 4101 (34-00230) Product Manual User Manual
Page 74

62
A
PPENDIX
B: C
USTOMER
S
ERVICE
Ordering
Information
Each PRISM 4101 unit is equipped with a V.35 and RS-232D data port
(F-4101-001-1111 is the default part number). You may order you unit with the
optional equipment listed in Table B-1. The optional Ethernet or Token Ring LAN
interface cards may be factory or customer installed into any PRISM 4101 model.
Also provided in yourshipment is an 8-pin modular to 8-pin modular (four twisted
pairs) network cable (9-1001-004-010), a reference manual (34-00230) and a
configuration guide (45-00137).
Optional
Equipment
You may also require optional equipment for the installation and operation of the
unit. Table B-2 lists the available options for the PRISM 4101.
Table B-1 PRISM 4101 Ordering Numbers
F-4101-001--11CD
C
0
1
2
D
1
2
3
PRISM 4101
SNMP Option
SLIP
Ethernet
Token Ring
Dial Backup Option
RS-232 Backup
Internal V.32 Modem
Backup
Internal ISDN
F-3100-100--111 Single
Ethernet
Card
F-3100-200--111
Single Token Ring Card
Table B-2 Option Equipment for the PRISM 4101
Network Cables
9-1001-070-xxx
9-1544-619-xxx
9-1001-004-xxx
DDS cross-over kit
Network
LAN interface
Dial Backup Cables
9-1001-110-xxx
8-pin to 6-pin DBU to ISDN interface
V.35 Cables
9-1001-052-xxx
9-1001-053-xxx
9-1001-086-xxx
DB-25 to Winchester 34-pin male to male, straight through
DB-25 to Winchester 34-pin male to female, straight through
DB-25 to Winchester 34-pin male to male, null modem
RS-232 Cables
9-1001-211-xxx
9-1001-212-xxx
9-1001-044-xxx
DB-25 to DB-25 male to male, straight through
DB-25 to DB-25 male to female, straight through
DB-25 to DB-25 male to male, null modem
*xxx denotes the cable length (in feet).