Verilink PRISM 4101 (34-00230) Product Manual - Manual (Page 50)

38 C HAPTER 4: T ERMINAL I NTERFACE
allowed. The DTE Port Parameters screen (Figure 4-9) sets the following operating
parameters for the V.35 or RS-232 ports.
Figure 4-9 DTE Port Parameters Screen
Port Type. The active port is a display only field. The PRISM 4101 automatically
switches to the connector supplying data.
Port Rate. Selects the DTE interface line rate. The choices are 2.4, 4.8, 9.6, 19.2,
38.4, 54, 56, 57.6, 62, or 64 kbps (Table 4-4). The available choices are based on
the Data Mode, DDS Rate, and DTE Port Format.