Verilink PRISM 4101 (34-00230) Product Manual - Manual (Page 15)

Specifications 3
Equipment Interface Sync Data Rates: 2.4, 4.8, 9.6, 19.2, 38.4, 54, 56, 62, and 64 kbps
Async Data Rates: 2.4, 4.8, 9.6, 19.2, 38.4, and 57.6 kbps
Rate Adaptation: Adapts subrate data port speeds to 56 or 64 kbps line rate
Antistream Timer: Off, 10, 30, or 60 seconds
DTE Connection: 34-pin V.35 (ITU) and 25-pin RS-232D (EIA)
Diagnostics Loopbacks: CSU, V.54 (receive and send)
BERT: 511 Pattern
Management
Interfaces
SUPV Port (Supervisory)
Connection: 8-pin modular (RS-232)
Data Rates: 1.2, 2.4, 9.6, & 19.2 kbps
SLIP Port (Single Line Internet Protocol)
Connection: 8-pin modular (RS-232)
Data Rates: 1.2, 2.4, 9.6, & 19.2 kbps
Ethernet (optional)
Connection: 8-pin modular
Network Protocol: TCP/IP based networks
Data Rate: 10 Mbps
Compatibility: 10BASE-T, ISO/IEC 8802-3
Token Ring (optional)
Connection: 8-pin modular
Network Protocol: TCP/IP based networks
Data Rate: 4 or 16 Mbps
Compatibility: Type 3 UTP, ISO/IEC 8802-5
Dial Backup
Connection: RS-232, 10-pin modular
Backup Service: PSTN or ISDN, sync or async
Configuration: Information for backup unit is stored in the PRISM 4101 and
transmitted to backup unit by inband AT commands
Dialing: Numbers programmed and stored in the PRISM 4101, and
transmitted to backup unit by inband AT commands
Restoral: Manual or automatic restoral to leased line service
Power
115 VAC: 150 mA, 14 W, 47 BTU maximum