Maintenance reset, Factory reset, Maintenance reset factory reset – Verilink PRISM 4101 (34-00230) Product Manual User Manual
Page 64

52
C
HAPTER
4: T
ERMINAL
I
NTERFACE
This command causes the unit to restart and will interrupt network traffic. As a safety
procedure, the system will prompt you again if you want execute this command.
Maintenance Reset
This field will clear all user selectable parameters, performance registers,
passwords, and alarms but saves the IP Address. All alarm threshold parameters
are set to default values. These settings are then written to non-volatile memory as
the saved configuration.
This command causes the unit to restart and will interrupt network traffic. As a safety
procedure, the system will prompt you again if you want execute this command.
Factory Reset
Clears all user selectable parameters including the IP Address. To exit this screen
without performing the reset function, press the Return key with No selected. To
proceed with the reset function, move the cursor to Yes and press Return. The reset
operation sets all parameters to the factory default settings and zeros all
performance registers.
This command causes the unit to restart and will interrupt network traffic. As a safety
procedure, the system will prompt you again if you want execute this command.