Dds dte objects – Verilink PRISM 4101 (34-00230) Product Manual User Manual
Page 66

54
C
HAPTER
A: MIB R
EFERENCE
DDS DTE
Objects
This section displays the MIB definitions for the object identifier ddsDteConfig
(1.3.6.1.4.1.425.2.2.2).
ddsNetCircuitAssur
{ dds NetConfigEntry 9 } read-write
Allows enabling or checking the setting of the circuit assurance
option.
ddsNetAntiStrTimer { dds NetConfigEntry 10 } read-write
The object is the identifier of the current unit loop mode.
Object Name
Object ID
User Access
Object Description
Object Name
Object ID
User Access
Object Description
ddsDteIndex
{ ddsDteConfigEntry 1 }
read-only
This object is the identifier for the DTE interfaces on a managed
device.
ddsDteRate
{ ddsDteConfigEntry 2 }
read-write
Allows verifying or selecting the DTE data rate.
ddsDteFormat
{ ddsDteConfigEntry 3 }
read-write
This variable describes the current operations format of the DTE
interface.
ddsDteParity
{ ddsDteConfigEntry 4 }
read-write
Allows verifying or selecting parity when operating in ASYNC
mode.
ddsDteStopBit
{ ddsDteConfigEntry 5 }
read-write
Allows verifying or setting the Stop Bit setting when in async mode.
ddsDteSendCode
{ ddsDteConfigEntry 6 }
read-write
Allows starting a DTE BERT or verifying the setting of the DTE
BERT.
ddsDteLoopConfig
{ ddsDteConfigEntry 7 }
read-write
Allows setting a DTE loop or verifying the status of a DTE loop.
ddsDteStatus
{ ddsDteConfigEntry 8 }
read-only
Reports the operations status of the DTE interface.
ddsDteInterfaceType { ddsDteConfigEntry 9 }
read-only
Reports the DTE interface type being used.
ddsDteV54Loop
{ ddsDteConfigEntry 10 } read-write
Allows selecting or verifying the operational state of the V.54
option.
ddsDteRtsCtsDelay
{ ddsDteConfigEntry 11 } read-write
Allows verifying or selecting setting of the RTS-to-CTS delay
option.
ddsDteRtsStatus
{ ddsDteConfigEntry 12 } read-only
Reports the current status of the RTS control lead.
ddsDteCtsStatus
{ ddsDteConfigEntry 13 } read-only
Reports the current status of the CTS control lead.
ddsDteDcdStatus
{ ddsDteConfigEntry 14 } read-only
Reports the current status of the DCD control lead.
ddsDteDtrStatus
{ ddsDteConfigEntry 15 } read-only
Reports the current status of the DTR control lead.
ddsDteDsrStatus
{ ddsDteConfigEntry 16 } read-only
Reports the current status of the DSR control lead.
ddsDteDsrControl
{ ddsDteConfigEntry 17 } read-write
This variable describes the setting for the options on the DTE DSR
lead (Circuit 107/CC).
ddsDteDcdControl
{ ddsDteConfigEntry 18 } read-write
This variable describes the setting for the options on the DTE DCD
lead (Circuit 109/CF).
ddsDteRtsControl
{ ddsDteConfigEntry 19 } read-write
This variable describes the setting for the options on the RTS and
CTS leads (Circuit 105/CA and 106/CB).
ddsDteDtrAlarm
{ ddsDteConfigEntry 20 } read-write
This variable describes the setting for the options on the DTR lead
(Circuit 108/CD).
ddsDteRLDetect
{ ddsDteConfigEntry 21 } read-write
This variable describes the setting for the options on the Remote
Loopback lead (Circuit 140/RLB).
ddsDteLLDetect
{ ddsDteConfigEntry 22 } read-write
This variable describes the setting for the options on the Local
Loopback lead (Circuit 141/LLB).
ddsDteDteMode
{ ddsDteConfigEntry 23 } read-write
This variable describes the mode inwhich data is being sent from the
DDS unit back towards the network.