Verilink PRISM 3000 (34-00184) Product Manual - Manual (Page 7)

General 1-3 PRISM 3000
Interface Standards: Internet RFC1157 (SNMP)
RFC1213 (MIB-II)
RFC1406 (DS1 MIB)
Token Ring Interface
Network Protocol: TCP/ IP based networks
Data Rate: 4 or 16 Mb/s
Connection: Female DB9
Compatibility: Type 1 shielded twisted pair (STP)
networks and Type 3 unshielded
twisted pair (UTP) networks (with
adapter)
Standards: ISO/IEC 8802-5 (Token Ring)
MIB-II: Device identification and interface
performance data. All applicable
objects & reporting traps maintained.
DS1 MIB: DS1 network interface configuration,
performance objects, and alarm
reporting traps are maintained.
Interface Standards: Internet RFC1157 (SNMP)
RFC1213 (MIB-II)
RFC1406 (DS1 MIB)
Diagnostics
Performance: Monitoring per TR54016 and T1.403
Network Loops: Line loopback or payload loopback
Fractional Loop: Responds to inband V.54 loop code
DTE Port Loops: Loop toward DTE or network
BERT: Multiple test patterns toward network
or DTE ports
Alarms
Activation: Programmable thresholds
Reporting: Call out on alarm (COA), NO/ NC
dry contacts, or the EM8000 manager
Contact Ratings: 0.6 A @ 125 VAC
2.0 A @ 30 VDC
Power
110 VAC: 0.254A, 28 W, 95 BTU max
220 VAC: 0.127 A, 28 W, 95 BTU max
48 VDC: 0.583 A, 28 W, 95 BTU max
Mechanical
Mounting: Desktop or horizontal rack
Dimensions: 17.5" W, " H, 12.5" D
Weight: pounds
Environmental
Operating Temp: 0° to 50° C (32° to 122°F)
Storage Temp: -20° to 85° C (-4° to 185°F)
Humidity: 95% maximum (non-condensing)
Compatibility
TR62411: December 1990
TR54016: September 1989
T1.403: 1989
TR54019A: April 1988
Industry Listings
FCC Compliance: Part 15 Subpart B, Class A
FCC Part 68 Reg # FXKUSA-74467-DE-N
UL Listed: E110448
CSA Certified: LR98859
DOC /CSO3: 1653 5193 A
1.3 FCC Requirements
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and
if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communi-
cations. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user is
required to correct the interference at his own expense.
Shielded cables must be used to ensure compliance with the
Class A FCC limits.
WARNING: Changes or modifications to this
unit not expressly approved by the party responsible for
!