Verilink M1-3 (880-503136-001) Product Manual - Manual (Page 71)

M1-3 Default Configuration
Verilink M1-3 User Manual A-3
Diagnostics Menu
By default, there are no active loopbacks at any M1-3 port and all
transmit test alarms are disabled. See
Figure A-5 and Figure A-6 .
Figure A-5 Line Loopback Options Submenu
Figure A-6 Transmit Alarm Options
-- HSM 2113 DS3 LINE LOOPBACK OPTIONS MENU -- -- HSM 2113 DS3 LINE LOOPBACK OPTIONS MENU -- -- HSM 2113 DS3 LINE LOOPBACK OPTIONS MENU -- -- HSM 2113 DS3 LINE LOOPBACK OPTIONS MENU --
Active Loop: None Active Loop: None Active Loop: None Active Loop: None
L) List Active Loop Status L) List Active Loop Status L) List Active Loop Status L) List Active Loop Status
A) Activate loopback D) Deactivate loopback
A) Activate loopback D) Deactivate loopback A) Activate loopback D) Deactivate loopback A) Activate loopback D) Deactivate loopback
X) Exit this screen X) Exit this screen X) Exit this screen X) Exit this screen
-- HSM Transmit Alarm Options -- -- HSM Transmit Alarm Options -- -- HSM Transmit Alarm Options -- -- HSM Transmit Alarm Options --
1) Yellow Disabled 1) Yellow Disabled 1) Yellow Disabled 1) Yellow Disabled
2) AIS Disabled
2) AIS Disabled 2) AIS Disabled 2) AIS Disabled
3) Idle Disabled
3) Idle Disabled 3) Idle Disabled 3) Idle Disabled
4) FEBE Disabled
4) FEBE Disabled 4) FEBE Disabled 4) FEBE Disabled
5) FEAC No FEAC Alarm
5) FEAC No FEAC Alarm 5) FEAC No FEAC Alarm 5) FEAC No FEAC Alarm
X) Exit this screen
X) Exit this screen X) Exit this screen X) Exit this screen