Verilink M1-3 (880-503136-001) Product Manual - Manual (Page 21)

Quick Set-Up
Verilink M1-3 User Manual 2-3
Figure 2-2 M1-3 Configuration Menu
NOTE: For the rest of this chapter, you are not instructed to press
E NTER after each command. Generally, E NTER is used after
each keyboard entry.
Configuring the M1-3
This section shows how to configure the M1-3 module to the
sample application from its default values.
NOTE: This chapter assumes the SCM parameters are already set
(i.e. the time, date, etc.).
To configure the M1-3 module from the SCM Main Menu:
1. Select S from the SCM Main Menu.
2. Type the shelf and slot number of the M1-3 (1,6).
When the M1-3 is selected, the brackets have moved to the [M] in
slot 6.
Configuration
Menu
The M1-3 Configuration Menu is used to enable each of the ports
and configure parameters such as interface type and data port
mode. After configuring the ports, the Circuit Manager feature of
the SCM is used to build the connections to other modules.
-- VERILINK SCM CONTROLLER : FW Rev 1.17, Aug 12 1998 08:33:28 -- -- VERILINK SCM CONTROLLER : FW Rev 1.17, Aug 12 1998 08:33:28 -- -- VERILINK SCM CONTROLLER : FW Rev 1.17, Aug 12 1998 08:33:28 -- -- VERILINK SCM CONTROLLER : FW Rev 1.17, Aug 12 1998 08:33:28 --
Site name: SCM Tutorial Access level: 4 Site name: SCM Tutorial Access level: 4 Site name: SCM Tutorial Access level: 4 Site name: SCM Tutorial Access level: 4
Managing at NEAR end node [0.0.0.2] Node id: 122
Managing at NEAR end node [0.0.0.2] Node id: 122 Managing at NEAR end node [0.0.0.2] Node id: 122 Managing at NEAR end node [0.0.0.2] Node id: 122
<- SLOT -> <- SLOT -> <- SLOT -> <- SLOT ->
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13 SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13 SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
0 - - - - - - - - - - - - -
0 - - - - - - - - - - - - - 0 - - - - - - - - - - - - - 0 - - - - - - - - - - - - -
1 M [*S] - Q - I M - - - - - - -
1 M [*S] - Q - I M - - - - - - - 1 M [*S] - Q - I M - - - - - - - 1 M [*S] - Q - I M - - - - - - -
2 - - - - - - - - - - - - -
2 - - - - - - - - - - - - - 2 - - - - - - - - - - - - - 2 - - - - - - - - - - - - -
3 - - - - - - - - - - - - -
3 - - - - - - - - - - - - - 3 - - - - - - - - - - - - - 3 - - - - - - - - - - - - -
4 - - - - - - - - - - - - -
4 - - - - - - - - - - - - - 4 - - - - - - - - - - - - - 4 - - - - - - - - - - - - -
KEY: D=QUAD D, I=IMUX, M=M1-3, Q=QUAD T1, S=SCM
KEY: D=QUAD D, I=IMUX, M=M1-3, Q=QUAD T1, S=SCM KEY: D=QUAD D, I=IMUX, M=M1-3, Q=QUAD T1, S=SCM KEY: D=QUAD D, I=IMUX, M=M1-3, Q=QUAD T1, S=SCM
S) shelf/slot O) administration S) shelf/slot O) administration S) shelf/slot O) administration S) shelf/slot O) administration
C) configuration D) diagnostics
C) configuration D) diagnostics C) configuration D) diagnostics C) configuration D) diagnostics
P) performance/status A) alarm
P) performance/status A) alarm P) performance/status A) alarm P) performance/status A) alarm
B) circuit manager I) manufacturing info
B) circuit manager I) manufacturing info B) circuit manager I) manufacturing info B) circuit manager I) manufacturing info
X) logoff
X) logoff X) logoff X) logoff