Verilink M1-3 (880-503136-001) Product Manual - Manual (Page 59)

M1-3 Diagnostics
Verilink M1-3 User Manual 5-3
To access the M1-3 Craft interface menus and monitor T1
performance, connect the terminal cable to the L
OCAL port on the
front of the M1-3. Set your terminal parameters to:
• 19.2 kbit/s
• 8 data bits
• No parity
• One stop bit
• No flow control
1. Press E NTER and the [2113] HSM > [2113] HSM > [2113] HSM > [2113] HSM > prompt displays.
2. Type “craft” (lowercase).
When the Your Password Your Password Your Password Your Password prompt displays,
3. Type the word “verilink” and press E NTER .
The M1-3 Craft Interface Menu displays as shown in Figure 5-3 .
Figure 5-3 M1-3 Local Port Menu
The M1-3 L OCAL port Performance Menu provides a number of
monitoring options. Access the Performance Menu, type “p” and
press E
NTER . The DS3 Performance Monitoring Menu shown in
Figure 5-4 displays.
-- VERILINK M1-3 CRAFT INTERFACE at [3,2]:FW Rev 5.06, Aug 10 1998 -- -- VERILINK M1-3 CRAFT INTERFACE at [3,2]:FW Rev 5.06, Aug 10 1998 -- -- VERILINK M1-3 CRAFT INTERFACE at [3,2]:FW Rev 5.06, Aug 10 1998 -- -- VERILINK M1-3 CRAFT INTERFACE at [3,2]:FW Rev 5.06, Aug 10 1998 --
Near End Location ID : Near End Location ID : Near End Location ID : Near End Location ID :
Far End Location ID :
Far End Location ID : Far End Location ID : Far End Location ID :
Node Address : 0.0.0.2
Node Address : 0.0.0.2 Node Address : 0.0.0.2 Node Address : 0.0.0.2
Acp Backplane Bus : A
Acp Backplane Bus : A Acp Backplane Bus : A Acp Backplane Bus : A
Inband over FDL : Enabled
Inband over FDL : Enabled Inband over FDL : Enabled Inband over FDL : Enabled
--- MAIN MENU --- --- MAIN MENU --- --- MAIN MENU --- --- MAIN MENU ---
P) Performance P) Performance P) Performance P) Performance
D) Diagnostics
D) Diagnostics D) Diagnostics D) Diagnostics
C) System Configuration
C) System Configuration C) System Configuration C) System Configuration
O) Node Administration
O) Node Administration O) Node Administration O) Node Administration
W) Change Craft Password
W) Change Craft Password W) Change Craft Password W) Change Craft Password
T) Change Craft Timeout Length
T) Change Craft Timeout Length T) Change Craft Timeout Length T) Change Craft Timeout Length
X) System Log Off
X) System Log Off X) System Log Off X) System Log Off
[2113] HSM > [2113] HSM > [2113] HSM > [2113] HSM >