Verilink M1-3 (880-503136-001) Product Manual - Manual (Page 69)

Verilink M1-3 User Manual A-1
Appendix
A
M1-3 Default Configuration
This appendix contains the default values for the M1-3. Only three
menus have default settings. The remaining M1-3 menus contain
blank fields. The M1-3 menus with default values are:
• Configuration Menu
• Performance Menu
• Diagnostics Menu
Configuration Menu Defaults
The Configuration Menu contains two options with default
settings. These options are:
• T3 Port Defaults
• T1 Port Defaults
Figure A-1 and Figure A-2 show the default values for the T3 and T1
port configuration.
Figure A-1 T3 Port Defaults
Figure A-2 T1 Port Defaults
-- M1-3 DS3 PORT CONFIGURATION MENU -- -- M1-3 DS3 PORT CONFIGURATION MENU -- -- M1-3 DS3 PORT CONFIGURATION MENU -- -- M1-3 DS3 PORT CONFIGURATION MENU --
M) line type C bit M) line type C bit M) line type C bit M) line type C bit
H) coding type Bipolar
H) coding type Bipolar H) coding type Bipolar H) coding type Bipolar
R) performance control On
R) performance control On R) performance control On R) performance control On
C) FEAC Enabled
C) FEAC Enabled C) FEAC Enabled C) FEAC Enabled
I) inband control Enabled
I) inband control Enabled I) inband control Enabled I) inband control Enabled
B) line build out Normal Cable
B) line build out Normal Cable B) line build out Normal Cable B) line build out Normal Cable
-- M1-3 T1 PORT CONFIGURATION MENU -- -- M1-3 T1 PORT CONFIGURATION MENU -- -- M1-3 T1 PORT CONFIGURATION MENU -- -- M1-3 T1 PORT CONFIGURATION MENU --
Port 1 Port 1 Port 1 Port 1
I) in service yes I) in service yes I) in service yes I) in service yes
F) frame format SF
F) frame format SF F) frame format SF F) frame format SF
T) trunk condition bits(A/B) 1/1
T) trunk condition bits(A/B) 1/1 T) trunk condition bits(A/B) 1/1 T) trunk condition bits(A/B) 1/1