Daktronics All Sport 5000 - Manual (Page 325)

308 Water Polo Operations
(Continued from previous page)
LCD Display Action
SHOT CLOCK-MODE
SYNC W/ MAIN?
Press <YES> to synchronize the shot clock with the
main clock.
If <STOP> for the main clock is pressed while the
main and shot clocks are running, the shot clock
stops. The shot clock restarts when <START> is
pressed for the main clock.
Press <NO> to allow the shot clock to run
independently of the main clock. The shot clock starts
and stops only with the switch on the remote shot
clock control console
SHOT CLOCK-MODE
AUTO BLANK?
Press > to blank the shot clock time when the
shot clock time is greater than or equal to the main
clock time. The shot clock is reset and stopped when
the display is blanked to eliminate inadvertent
sounding of shot clock horn.
Press <NO> to display the shot clock time at all times.
Penalty Time
Default times can be set for the minor and major penalty keys. The minor penalty time is
used as the default when first entering the player penalty function.
LCD Display Action
Penalty time
set mm:ss
mm:ss = current setting
Enter the correct default time for a penalty in minutes
and seconds on the number pad and press the
<ENTER> key.
For example, 0:25.
The penalty time is used as the default when pressing
the player penalty start function.