Daktronics All Sport 5000 - Manual (Page 251)

234 Event Counter
Value/Days
Use the key to set the Time in addition to the number of days to be
counted.
Press to start the main clock. If the console is set to count down, the time value
decrements to 00:00.00 and the day value decrements by one. This continues until 0 days and
00:00.00 time occurs. The console then begins counting up and counts the days and time that
have elapsed since the event occurred.
Note: If the console is set to stop at zero, the clock will not begin counting up until the
<START> key is pressed.
LCD Display Action
DAYS
nnn
nnn = current value
Enter the number of days for countdown (0 – 999).
15.3 Time Base Counter
LCD Display Action
VALUE = nnnnnnn
NXT INC HH:MM:SS
nnnnnnn = current value
The current value is shown on the top line of the
LCD. The time remaining until the next increment
(or decrement.) is shown on the bottom line.
Value/Days
LCD Display Action
VALUE
nnnnnnnn
nnnnnnn = current value
Press to begin counting from the
entered initial value. The value can be up to eight
digits.