Daktronics All Sport 5000 - Manual (Page 310)

Water Polo Operations 293
Section 22: Water Polo Operations
Sport Insert: 0G-178439
The Sport Insert drawing is located at the end of this section. The Team Name insert and Block
Diagram drawings are located in Appendix A.
Reference Drawings:
Block Diagrams, A/S5000/3000 Hockey.............................................................Drawing A-124689
Insert, Team Name .............................................................................................Drawing A-125290
Insert, Water Polo ...............................................................................................Drawing A-178439
Refer to the information in Section 2 of ED-11976 to start up the console and use the sport insert.
Read Section 2, Basic Operation of ED-11976 carefully to fully understand the following operation
instructions.
If an insert is lost or damaged, a copy of the insert drawing located at the end of this section can be
used until a replacement can be ordered.
Use the labels provided in Appendix B to attach the correct code number label to the sport insert in
the appropriate location. Write the code number in the space provided below.
Write the correct code number here.
If you do not know the code number to enter for your scoreboard, refer to Appendix B in this
manual. If you do not know the model number of your scoreboard, refer to the Installation and
Maintenance manual provided with the scoreboard.
22.1 Water Polo Keys
Time Out On/Off
<
TIME OUT ON/OFF > stops and starts the time out clock. The length of both the full and
partial time outs can also be changed when the time out clock is stopped.
Note 1: Only the time outs configured in the
EDIT SETTINGS function are displayed on the
LCD and available for selection.
Note 2: The up and down arrow keys can also be used to select the full and partial time outs
(please refer to the table on the following page).