Triplett 9320-A - Manual (Page 24)

23 Triplett Model 9320-A
FIGURE 5
MEASURING VOLTAGE
Read the voltage on the display.
If the meter is set to Auto, it may display overrange OL momentarily while it is
selecting the proper measurement range. If the meter display indicates overrange
OL for longer than 2 seconds, disconnect the test probes from the circuit immedi-
ately. An overrange condition exists. Do not attempt to measure this voltage. It
exceeds the capability of the meter.
For DC voltage measurements, the Negative Sign ( - ) annunciator indicates that
the V
Ω Hz jack is negative with respect to the COM jack.
To hold the reading, press the D-HOLD button so that the annunciator is vis-
ible on the display.
Disconnect the test leads from the circuit under test and return the FUNCTION
Switch to the OFF position.