Triplett 9320-A - Manual (Page 16)

15 Triplett Model 9320-A
Hold Annunciator – This annunciator is displayed any time the hold
mode is active.
REL Annunciator – This annunciator is displayed whenever the REL
mode or the DCA ZERO–ADJ mode is active.
Continuity Annunciator – This annunciator is displayed whenever the
Continuity (Beeper) mode is selected.
Diode Test Annunciator – This annunciator is displayed whenever the
Diode Test mode is selected
%
Percent Annunciator – This annunciator is displayed whenever the
Duty Cycle mode is selected.
° F
Fahrenheit Annunciator – This annunciator is displayed whenever the
Temperature measurement mode is selected for Fahrenheit display.
° C
Centigrade Annunciator – This annunciator is displayed whenever the
Temperature measurement mode is selected for Centigrade display.
Ω , k Ω , M Ω
Resistance (Ohms) Annunciators – These annunciators are displayed
whenever Resistance is being measured. The displayed annunciator
indicates the range of resistance that is being measured.
mV, V
Voltage Annunciators – These annunciators are displayed whenever
Voltage is being measured. The displayed annunciator indicates the
range of voltage that is being measured.
A
Current (Amperes) Annunciator – This annunciator is displayed when
ever the Current (Amps) measurement mode is active.