Triplett 9007-A - Manual (Page 5)

5
meter or injury to the user.
2.10 Make sure test leads are properly inserted and
seated in
the meter’s input jacks. A loose test lead
may cause the user
to believe that no hazard exists, when in fact,
dangerous voltages or currents may be present.
Failure to observe
this precaution may result in damage to the meter or
injury to the user.
2.11 Do not touch the tips of the test leads when making
a measurement. Do not touch live circuitry when
making a measurement. Failure to observe this
precaution may result in damage to the meter or
injury to the user.
2.12 Before using the meter, examine both the meter and
the test leads for damage. Do not use the meter if
damage (damaged insulation, exposed metal, cracked
case, burnt smell, etc.) is evident. Failure to observe
this precaution may result in damage to the meter or
injury to the user.
2.13
Insert the test leads in the jacks specified in the
instructions for performing particular tests. Inserting