Triplett 9007-A - Manual (Page 4)

4
2.5 Follow the recommendations of any Trade
Organizations or Regulatory Agencies whose scope
encompasses the use of this meter. Failure to do so
may result in damage to the meter or injury to the user.
2.6 Do not open this meter for maintenance without
first disconnecting the test leads from all external
circuitry. Failure to observe this precaution may
result in damage to the meter or injury to the user.
2.7 Repairs and maintenance must only be carried out by
qualified service personnel or qualified electricians /
technicians who know the dangers of, and the safety
rules applicable to this type of equipment. Failure to
observe this precaution may result in damage to the
meter or injury to the user.
2.8 Always set the meter to the appropriate range or
mode before connecting it to the circuitry to be
tested. Failure to observe this precaution may result
in damage to the meter or injury to the user.
2.9 Check the condition of the test leads before making a
measurement. Do not use the test leads if there is
damaged insulation or exposed metal. Failure to
observe this
precaution may result in damage to the