Tri Tool 765RVC Hyrdaulic Power Supply - Manual (Page 28)

28
TRI TOOL INC.
92-0306 : Rev. 140715
Verify motor T1, T2 and T3 connect to the correct terminals or motor reversal
and subsequent pump damage can occur.
Control Voltage Transformer
Change the connection of the primary side of the step down transformer in
the control box.
Do Not change the lead connectors to terminal strip point 1, only the
lead connected to terminal strip point 6 or 3, depending on which way
the voltage is being changed.
Final Check
Verify all of the changes that have been made.
Verify the pump rotation.
Control Voltage Transformer