Tri Tool 765RVC Hyrdaulic Power Supply - Manual (Page 22)

22
TRI TOOL INC.
92-0306 : Rev. 140715
WARNING:
The Hydraulic Pump will be damaged if it is driven backwards. The charge
pump doesn’t circulate oil if rotated in the reverse direction and therefore
overheats in about 10 seconds of continuous reverse running.
The motor has a run direction arrow.
The motor fan can be viewed through a hole in the top of the housing or the pump
to motor coupling can be viewed through the adapter port.
If necessary, reverse the two (2) power leads to the starter as it is normally required
to change the direction of a three (3) phase motor.
Proceed with the operation.
Operator's Pendant