Thinklogical Remote Power Distribution 12 Manual - Manual (Page 9)

P D U - 1 2 P r o d u c t M a n u a l ,
M a y , 2 0 1 4
Page 9
3.0. PDU-12 Technical Specifications
PDU-12 DC Power Distribution Unit
2 AC/DC Power
Supply Voltage
100 – 240 VAC at a frequency of 50 - 60Hz.
Source Voltage +5 volts ±.25volts at a maximum of 4 amps.
Dimensions
Height: 1.72” (43.69 mm)
Depth: 10.52” (267.08 mm)
Width: 17.49" (444.29 mm)
Width (with mounting brackets): 19.03" (483.46 mm)
(Tolerance: ± .039"; 1 mm)
Rear Panel
Connectors
12 DC Locking Power Jacks (with .100 inch diameter center pin)
Dry Contact Alarm
Dry Contact Alarm
1 Green/Red LED Reports:
Power Supply 1 Fan status
Power Supply 1 Power status
Power Supply 2 Fan status
Power Supply 2 Power status
+5 VDC output 1-12 Power status
Front Panel LEDs
1 green/red LED for Power Supply 1 fan status
1 green/red LED for Power Supply 1 power status
1 green/red LED for Power Supply 2 fan status
1 green/red LED for Power Supply 2 power status
12 green LEDs to indicate the status of each of the +5 VDC outputs.
Electrical Cables
PWR-000006-R AC 3-wire line cord, 6FT (2)
CBLA000050 DC power cable w/ locking connectors, 6FT (12)
CBLA000051 DC power cable w/ one mini XLR connector, one
locking connector, 6 FT (optional; supplied as required)
Operating Temp
and Humidity
0° to 50°C (32° to 122 °F), 5% to 95% RH, non-conde nsing
Weight
Shipping Weight
7.5 lb (3.4 kg)
15 lb (6.8 kg)
Compliance Approvals for US, Canada, and European Union
Warranty 12 months from date of purchase. Extended warranties available.