Thinklogical Direct Fiber Input Card for Christie Entero Video Wall - Manual (Page 6)

C h r i s t i e D i r e c t F i b e r I n p u t C a r d M a n u a l , J a n u a r y , 2 0 1 4 Page 5
1.3 Product Features
• Supports One Single-Link DVI signal (All single-link DVI signals)
• 6.25Gbps allows for full frame rate transmission of uncompressed DVI
• Patented MRTS Technology provides flawless image quality with no frame dropping
• HDCP Compliant (with HDCP Compliant Transmitter)
• DDC/EDID Compliant
• Mini-USB port for software program updates
• LC fiber connectors
• Hot-swappable optical module (SFP+)
• Simple plug and play design
• MX and VX Router Compatibility, Scalable from 5 to 640 ports
• Multi-Mode or Single Mode Compatibility
• Multi-Mode Extension up to 1000 meters
• Single-Mode Extension up to 80 kilometers
• L1 LED Status Indicator:
• Software Revision: At power-up, L1 blinks once for each software revision
(1 blink = rev. 1, 2 blinks = rev. 2, etc.)
• Fiber Input Link: L1 is ON when a fiber is detected and a valid signal is received
• VID LED Status Indicator:
• Hardware Code Revision: At power-up, VID blinks once for each hardware code revision
(1 blink = rev. 1, 2 blinks = rev. 2, etc.)
• Video Receiving: VID is ON when a valid video signal is received
• STATUS LED Indicator:
• Temperature: STATUS blinks for over-temperature conditions
• Active Back Channel Output: STATUS is ON when transmitting 2G back channel
• SFP Status: STATUS is ON when there is no SFP transmit fault
• Valid EDID Table: STATUS is ON when a valid EDID table has been received
For use with Christie Entero HB Video Wall Cube models:
• 50”, 67”, 70” and 80” High
Brightness SXGA+
• 70” High Brightness HD
• 72” High Brightness WUXGA
Provides easy integration with fewer points of failure, requiring just a single strand of fiber.
• No external receiver
• No additional external power supply
• No DVI cabling from receiver to cube