Tech Source Raptor OpenWindows for Solaris - Manual (Page 37)

5-1
Chapter 5
OPENWINDOWS
5.1 Overview
This section describes how to start up OpenWindows on the
Raptor cards. The examples in this chapter use raptor0 as the
device name but the device name of your card may be different.
The following table lists the different Raptor cards and their
corresponding device names. The device name will have the
card’s instance number appended to it. For example, the first
instance of a Raptor 2000 will have a device name of raptor0.
Raptor Card
Device Name
1000 raptor
2000 raptor
2500 rapqfp
1100T rap1kt
2100T rap2kt
2500T raptfp
2500T-DL raptfp
5.1.1 Raptor as the Console
If the Raptor is the console, type:
prompt# openwin
5.1.2 Raptor as the Secondary Framebuffer
If the PGX (Sun Microsystem’s on board video card) card is the
console and the Raptor is the second card, to start OpenWindows
on both cards, in multi-screen mode, type: